Plinius - HT301
|
| HT301 |
 |
| The PLINIUS HT-301 amplifier is, by description and design, aimed
squarely at the Home Theatre and Custom Installation market.
We have taken the proven design of the SB-301 and built on that
to achieve a dedicated professional-standard stereo amplifier that
will dependably operate in difficult conditions with difficult loads
day-in and day-out, and yet always manage to deliver the extraordinary
level of sonic performance that customers the world over demand
from PLINIUS.
During the HT-301’s development phase, we noted the key features
required by professional users and installers, and incorporated these
into a new PLINIUS amplifier design.
The HT-301 will satisfy the most demanding requirements of the
professional Custom Installation specialist, and sports a full array
of input and output fittings. Capable of delivering in excess of 300
wpc into an 8 ohm load, the PLINIUS HT-301 will drive the most
demanding speaker arrays with total ease and confidence, and is
fully protected by internal safety features.
The classic PLINIUS look, slightly revamped for the specific needs
of this growing market, allows easy installation into a standard
custom amplifier rack and can, of course, be used in a stand-alone
installation with other components if desired.
With the Plinius HT-301, you now have a High-End home amplifier
that is suitable for the most demanding Home Theatre or music
system operating conditions.
As with all PLINIUS amplifiers, the HT-301 is available in both Black
and Silver anodized finishes to fit into any décor.
Specifications For PLINIUS HT-301
Power:
310 watts continuous per channel into 8 Ohms
Both channels driven from 20Hz to 20kHz
Frequency Response:
20Hz to 20kHz +0.2dB
–3dB at 70 kHz
Distortion:
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping
Current Output:
100A short duration peak per channel
Fuse protected
Rise Time:
Typically 5μS
Phase Response:
+0° at 20Hz and –14° at 20kHz
Hum and Noise:
100dB below rated output 20Hz to
20kHz A-weighted
Input Impedance:
47,000 Ohms
Gain on RCA Inputs:
32dB
Gain on Balanced Inputs:
38dB
Dimensions:
Height: 212mm (8.35")
Width: 398mm (15.67")
Depth: 420mm (16.54")
Weight: 29kg (64lb) |
|
|
Print this page
